-37-
Mechanical Disassembly
13-1 Noise filter unit ass'y disassembly
1 Remove the noise filter cover.
2 Remove the inlet holder, and remove 2 screws-A(M3x10) and remove the AC inlet.
3 Remove the AC switch (SW901) backward.
4 Remove 2 screws-B(M4x12) and remove the lamp cover switch (SW902).
5 Remove 2 screws-C(M4x6) and remove the noise filter.
6 Remove fuse holder.
A
A
B
B
C
C
Inlet holder
SW901
AC inlet
SW902
Fuse holder
Noise filter
Noise filter cover
13-2 Wiring of the noise filter ass'y
See the following figures for wiring.
Blue
Brown
Fuse holder
From Power
Board "K6A"
To Next Page
Loading...
