-40-
Optical Parts Disassembly
1-1 Polarized glasses-out/pre-polarized glasses removal
Remove 1 screw-B (M2.5x4) on each stopper and take the polarized glasses upward
off.
B
B
B
Polarized glass-out (B)
Pre-Polarized glass (B)
Polarized glass-out (G)
Pre-Polarized glass (G)
Polarized glass-out (R)
Pre-Polarized glass (R)
(Green)
(Red)
(Blue)
Film side
Film side
Mount the pre-polarized glasses and polarized glasses as shown in the figure below.
Mounting direction
LCD panel/Prism top view
B-LCD panel
G-LCD panel
R-LCD panel
Prism
Film side
Film side
Film side
Film side
Film side
Green Marker
Blue Marker
Green Marker
Red Marker
Note on Pre-Polarized Glass mounting
Mounting direction of the Pre-Polarized Glass differs from each projector to get the
optimum optical performance (color shading). When mounting the Pre-Polarized Glass,
mount it with the same direction as it was mounted.
To Next Page
Loading...
