Why won't my Sanyo PLC-XK2200 Projector turn on, and the power light is blinking?
If your Sanyo Projector cannot be turned on and you see the POWER indicator blinking, it's likely due to a high internal temperature. Allow the projector to cool down until the POWER indicator stops blinking. Once the temperature returns to normal, you should be able to turn it on.
What to do if my Sanyo PLC-XK2200 Projector cannot be turned on due to detection of an abnormal condition?
If your Sanyo Projector does not turn on and you suspect an abnormal condition, unplug the AC power cord, then plug it back in. If the projector turns off again, unplug the AC power cord and contact the dealer or the service center for service and checkup.
How to turn on Sanyo PLC-XK2200 Projector?
Your Sanyo Projector is probably in stand-by mode. Press the ON/STAND-BY button to turn on the projector.
Why Sanyo PLC-XK2200 Projector cannot be turned on until cooling is completed?
If your Sanyo Projector cannot be turned on until cooling is completed, it means the projection lamp is cooling down. Wait until cooling is completed and the POWER indicator stops blinking.
What to do if Sanyo PLC-XK2200 Projector may have an iris module operational error?
Check the iris module and peripheral circuit. If needed, replace the iris module in your Sanyo Projector.
General| Resolution | 1024 x 768 (XGA) |
|---|---|
| Contrast Ratio | 400:1 |
| Display Type | 3LCD |
| Aspect Ratio | 4:3 |
| Lamp Life | 2000 hours (Normal Mode) / 3000 hours (Eco Mode) |
| Projection Size | 30" to 300" |
| Lamp Type | UHP |
| Input Ports | VGA, S-Video, Composite |
| Output Ports | VGA |
| Operating Temperature | 5 to 35 °C |
| Noise Level | 35 dB |
