16
Chapter 3 Basic Operation
Commands batch processing : Available Command
Items Description
Power ON/OFF.........................Sets up the Power ON or Power OFF.
Input,Source..............................Sets up the Input and Source. Selects Input and Source.
Screen.......................................Sets up the screen size. Resizes the picture screen.
Background
...............................Sets up the background. Selects the background screen for when no input signal is
detected.
Display
........................................Sets up the Display. Decides whether to display On-Screen Displays or not.
Shutter(No show)....................Sets up the Shutter (No show). Sets black out the image.
Lamp control.............................Sets up the Lamp control. Changes brightness of the screen.
Fan control.................................Sets up the Fan control. Chooses the running speed of cooling fans.
Setting timer for targets
The timer information for targets can be set up by the procedure below.
1 Choose a target which you want to set the timer.
2 Select Timer setting from Target menu. Timer selection dialog box will appear as the
below figure. Check in a check box of an event to carry out.
3 When you want to add events, click Add button. Input timer informations in Timer set-
ting dialog box, and click OK button.
4 Click OK button of Timer selection dialog box, timers are set to the selected target.
When selecting multiple targets, timers are set to all the selected targets.
Timer
Items Description
Execution date.........................Sets up the Timer execution date. (everyday or a day)
Execution time
..........................Sets up the Timer execution time. (hh:mm:ss)
Action .......................................Sets up the events.
To Next Page
Loading...
Need help?
General
