Sanyo PLC-XU75 Service Manual

-40-
Group/
Item
ITEM NAME FUNCTION INITIAL RANGE NOTE
18 R-CLXIN 5 0-255 Link with No.15
19 G-CLXIN 5 0-255 Link with No.16
20 B-CLXIN 5 0-255 Link with No.17
21 R-ENBX1IN 24 0-255
22 G-ENBX1IN 24 0-255
23 B-ENBX1IN 24 0-255
Group 200 Option
0 Logo Prohibition (Forced No Brand)
Logo Prohibition (0: Menu, 1: Forced, 2:
China, 3-9: not used)
0 0 - 2 Effective after AC On
1 RS232C Baudrate Baud Rate 0 0 - 2 0: 19200bps, 1: 9600bps, 2: 115200bps
2 PJLink Enable PJLink 0: Disable 1: Enable
3 Shipping Setting 0 0 - 20 Default set when the value is set to 10
4 CABLE SW Long Cable 0 0 - 10 0: Disable, 1: Enable
5 PW Debug Command Enable 0 0 - 1
0:Disable (Serial Command Eanble)
1: Enable (PW Debug Mode)
6 Device Refresh Disable 0 0 - 1
0:Enable, 1:Disable
No last memory
7 Device Access Disable 0 0 - 1
0:Enable (Normal), 1:Disable
No last memory
20 Projector Time Reset 0 0 - 20
Projector Time is cleared when the value is
set to 10
21 Lamp Warning Time (NORMAL)
Lamp Life at Normal Mode (Warning Time at
Normal)
500 - 8000
22 Lamp Warning Time (ECO)
Lamp Life at Eco Mode (Warning Time at
Eco)
500 - 8000
23 Lamp Warning Time (HIGH)
Lamp Life at High Mode (Warning Time at
High)
500 - 8000
30 Lamp life test enable 0:Disable 1:Enable, for safety test only
31 Lmap On time(for life test) For test purpose
32 Lamp Off time(for life test) For test purpose
33 Lamp total time(for life test) For test purpose
40 Lamp PWM PresAv 50Hz Lamp PWM PRES0 Setting (AV 50Hz) 80 0-255
41 Lamp PWM PresAv 60Hz Lamp PWM PRES0 Setting (AV 60Hz) 67 0-255
42 Lamp PWM PresUnlock Lamp PWM PRES0 Setting (No Signal) 67 0-255
43 Lamp PWM PresPcA Lamp PWM Frequency Setting A 2 0-255
44 Lamp PWM PresPcB Lamp PWM Frequency Setting B 3 0-255
45 Lamp PWM PrefHAv 50Hz Lamp PWM PREF0 Setting (AV 50Hz) 5000 0-65535
46 Lamp PWM PrefHAv 60Hz Lamp PWM PREF0 Setting (AV 60Hz) 5000 0-65535
47 Lamp PWM PrefHUnlock Lamp PWM PREF0 Setting (No Signal) 5000 0-65535
50 Lamp Replacement Display Lamp Warning Display On / Off 1 0 - 1 1: On, 0: Off
51 Filter Warning Display Filter Warning Display On / Off 1 0 - 1 1: On, 0: Off
52 Lamp Counter reset Times Reset Times of Lamp Counter 0 0 - 255 Read only
54 Factory Default Execute Times Reset times of Fanctory Default 0 0 - 255 Read only
55 Motor Disable Motors Disable 0 0 - 1 0: On, 1: Off
56 Menu Position Move menu (X asis) 0 0 - 1024
57 Menu Position Move menu (Y asis) 0 0 - 1024
59 Source Search Enable Source Search Enable (0:Disable 1:Enable) 0 0 - 1
Group 201 Option (signal)
0 FrameLock Option 1 0 - 1
0: FrameLockOFF at PC signal
1: FrameLockON at PC signal and 47Hz
(Vfreq) ~ Panel frequency of input signal
2 Field Sense Invert Enable 0 0 - 1
Reverse Processing of FLDINVSetting Value
0: Disable - Used FLDINV Setting Value
1: Enable - Used Reversed FLDINV Setting
Value
3
4 Sub Image Enable 1 0 - 1
0:Disable (Service Adjustment Dsiable,
Used all the Center Values
1:Enable (Service Adjustment Enable)
6 Zoom Accelerator Enable 0 0 - 1
0:Zoom Accelerator OFF,
1:Zoom Accelerator ON
No last memory
7 DZoom Reset by Keystone 0 0 - 1
0:Enable (Normal), 1:Disable (Dzoo is not
cancelled even if Keystone is cancelled)
No last memory
8 Stability Count Count Value of V-missing 5 0 - 255
9 Sensivity for Signal Lost (HSYNC)
Only used this value for No Signal
Judgement(Hz)
350 0 - 32767
10 Sensivity for Signal Lost (VSYNC)
Only used this value for No Signal
Judgement(Line)
3 0 - 255
11 Keystone Filter Center Value Reference Value 16 0 - 30
Group 205 Spread Spectrum
0 Spread Spectrum Enable 1 0 - 1 0: Off, 1: On
Electrical Adjustments

Sanyo PLC-XU75 Specifications

General

Brand	Sanyo
Model	PLC-XU75
Category	Projector
Language	English