10
Top Control
L LAMP REPLACE indicator
Turn yellow when the life of the projection lamp
draws to an end. (p.60, 69)
GWARNING indicator
Emit a red light when the projector detects
an abnormal condition. This also blinks red
when the internal temperature of the projector
exceeds the operating range. (p.57, 69)
E POWER ON/STAND-BY button
Turn the projector on or off. (p.18, 20)
B POWER indicator
– Lights red when the projector is in stand-by
mode.
– Lights green during operations.
– Blinks green in the Power management mode
(p.51).
HMENU button
Open or close the On-Screen Menu. (p.21)
J POINT (! ) buttons
–Select an item or adjust the value in the
On-Screen Menu. (p.21)
–Pan the image in Digital zoom + mode.
(p.36)
D SELECT button
– Execute the selected item. (p.21)
–Expand or compress the image in Digital
zoom mode. (p.36)
D
8
G
H
<
B
E
L
Part Names and FunctionsPart Names and Functions
J
< POINT () buttons
–Select an item or adjust the value in the
On-Screen Menu. (p.21)
–Pan the image in Digital zoom + mode.
(p.36)
– Adjust the volume level. (p.24)
8 AUTO SETUP button
Execute the setting of Auto setup (includes
Input search, Auto PC adj. and Auto Keystone
functions) in the setting menu. (p.23, 46).