Sanyo PLC-XW60 - Menu Bar

22
Basic Operation
Menu Bar
PC System Menu
Used to select
computer system.
(p.27)
Setting Menu
Used to set the
projector's operating
configurations.
(p.45-56)
Image Select Menu
Used to select an
image level among
Dynamic, Standard,
Real, Blackboard
(Green), Colorboard
and Image 1 ~ 4. (p.31)
For computer source
Guide Window
Show the selected
Menu of the
On-Screen Menu.
Screen Menu
Used to adjust size of
image. [Normal / True
/ Wide / Full / Custom
/ Digital zoom +/–]
(p.34-36)
For detailed functions, see Menu Tree on pages 66-68.
Image Adjust Menu
Used to adjust computer
image.[Contrast /
Brightness / Color temp.
/ White balance (R/G/B)
/ Sharpness / Gamma]
(p.33-34)
Sound Menu
Used to adjust the
volume or mute the
sound. (p.24)
PC Adjust Menu
Used to adjust
parameters to match
with input signal
format. (p.28-30)
Input Menu
Used to select
input source
either Computer
or Video. (p.26)
For video source
Input Menu
Used to select input
source either Video or
Computer. (p.37, 38)
Image Select Menu
Used to select an image level among
Dynamic, Standard, Cinema, Blackboard
(Green), Colorboard and Image 1 ~ 4. (p.40)
Screen Menu
Used to set size of
image to Normal, Wide
or Custom. (p.44)
AV System Menu
Used to select system
of selected video
source. (p.39)
Image Adjust Menu
Used to adjust picture image.
[Contrast / Brightness / Color / Tint
/ Color temp. / White balance (R/
G/B) / Sharpness / Gamma / Noise
reduction / Progressive ] (p.42-43)
Same function
as computer
menu.
Same function as
menu for computer
source.