Sanyo SAP–KR184GJH - Overload Prevention

8-6. Overload Prevention (Heating)
●
This function prevents overheating of the indoor heat exchange coil.
●
When the temperature of the indoor heat exchange coil rises above C°C outdoor fan speed changes from
H (High speed) to L (low speed).
●
When the temperature of the indoor heat exchange coil rises above B°C outdoor fan stops, if the indoor fan
is L (low speed), then the fan speed changes from L (low speed) to M (medium speed).
●
When the temperature of the indoor heat exchange coil rises above A°C, the compressor stops, and indoor
fan runs in LL (very low speed).
The operation temperature
shown as A, B, C and D in the
chart left differ by models.
NOTE
Outdoor fan
Compressor
Indoor fan
A°c
B°c
C°c
Indoor heat
exch. coil
temp.
D°c
H
OFF
OFF
H
ONON
Set Speed
Set Speed
LL
H→H
M→M
L→M
2 sec.
H→L
39
184 class 224 class
A 54 57
B 46 52
C 44 50
D 40 46