EasyManuals Logo

Sanyo TLS-1960P User Manual

Sanyo TLS-1960P
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #22 background imageLoading...
Page #22 background image
NORMAL RECORDING
Clog Detection
This VCR is equipped with a clog detection function.
The recording quality is monitored automatically. When
the heads are dirty and the recording quality
deteriorates, the output at the WARNING OUT terminal
becomes 0 V (Low) (Refer to WARNING OUT Terminal
on page 47), the m indicator flashes on the digital
display.
Setting the clog detection
1
Press the STANDBY/ON button.
2
Press the MENU button to display the MAIN MENU.
3
Turn the JOG dial to select the 3.GENERAL SET
line, then turn the SHUTTLE ring clockwise.
ø The (GENERAL SET) menu appears.
<GENERAL@SET>
TAPE@IN@MODE@@@@@STOP
TAPE@END@MODE@@@@REW
CLOCK@ADJUST@@@@@01:00
THREAD@CHECK@@@@@N
VIDEO@LOSS@@@@@@@N
CLOG@DETECT.@@@@@N
REMOTE@@@@@@@@@@@MENU
VIDEO@@@@@@@@@@@@COLOR
4
Turn the JOG dial until the CLOG. DETECT.
setting is highlighted, then turn the SHUTTLE ring
clockwise.
5
Turn the JOG dial to select the desired mode, then
turn the SHUTTLE ring clockwise.
N. . . . . . . Recording quality is not monitored
Y. . . . . . . Recording quality is monitored
6
Press the MENU EXIT button.
NOTES:
œ To cancel the m indicator display and reset the
WARNING OUT terminal output, press the STOP
button.
œ Clog detection is not possible if recording in 3-hour
mode.
Action to Take when the Video Signal
Deteriorates
If there is no video signal during recording or when a
menu is not displayed (in stop, fast forward or rewind
modes, etc.), VIDEO LOSS can be displayed
on-screen. If in the (WARNING OUT/CONTROL SET)
menu, VIDEO LOSS is set to Y”, the output at the
WARNING OUT terminal becomes 0V (Low) (Refer to
WARNING OUT Terminal on page 47).
1 Press the STANDBY/ON button.
2 Press the MENU button to display the MAIN MENU.
3 Turn the JOG dial to select the 3.GENERAL SET
line, then turn the SHUTTLE ring clockwise.
ø The (GENERAL SET) menu appears.
4
Turn the JOG dial until the VIDEO LOSS setting is
highlighted, then turn the SHUTTLE ring clockwise.
5
Turn the JOG dial to select the desired mode, then
turn the SHUTTLE ring clockwise.
N . . . . . . . . . The video loss warning is not
active.
Y. . . . . . . . . . The video loss warning is active.
6 Press the MENU EXIT button.
RQ4Q/EX (TLS-1960P GB) Wed. May, 08/2002
English
21

Other manuals for Sanyo TLS-1960P

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sanyo TLS-1960P and is the answer not in the manual?

Sanyo TLS-1960P Specifications

General IconGeneral
BrandSanyo
ModelTLS-1960P
CategoryVCR
LanguageEnglish

Related product manuals