35 English
PREPARING THE POWER
5 Close the camera’s monitor unit,
and set the camera in the docking
station.
h Set the camera securely, making
sure that the camera is correctly
oriented in relation to the terminal
contacts in the docking station.
h Charging begins when the camera
is set in the docking station.
h During charging, the multi-
indicator is lit red. When charging
is completed, the indicator turns
off.
h If the multi-indicator flashes red, it
indicates that the battery pack is
defective or the camera is not
correctly set in the docking station.
Reset the camera correctly in the
docking station.
h The charging time is approx.
200 minutes.
h The AC adaptor (supplied) can be
connected to the camera’s DC IN
terminal to charge the battery.
Multi-indicator
Docking station terminal
Downloaded From VideoCamera-Manual.com Manuals
To Next Page
Loading...
