English 36
Exposure correction
When capturing images, you can make the image lighter or darker.
1 Set the main switch to REC.
h To exit the Shooting Setting
Screen, press the MENU
button.
2 While the Shooting Screen is
displayed, toggle the SET
button to the right.
h The exposure correction bar
appears.
3 Toggle the SET button to the
left or right to adjust the
exposure.
h The exposure setting
numerical value is shown at
the left end of the exposure
bar.
h The exposure can be set to a
value from –1.8EV to +1.8EV.
h To cancel the exposure
correction bar, press the
MENU button or the SET
button.
HINT
The exposure correction setting is canceled in the following cases:
i When the pointer is set to the center position.
i After a Playback or Option Screen is accessed.
i When the main switch is set to PLAY.
i After the power is turned off.
12 00:00:15
MENU button
SET button
Main switch
To Next Page
Loading...
