Sanyo Xacti VPC-C40 - Page 5

English iv
Shooting
kVideo clip recording
1 Open the monitor unit, and
press the ON/OFF button
for at least 1 second to turn
the camera on.
2 Set the main switch to REC.
3 Press the video clip
recording button [ ].
h Recording begins.
h To stop recording, press
the video clip recording
button again.
kStill image
photography
1 Open the monitor unit, and
press the ON/OFF button
for at least 1 second to turn
the camera on.
2 Set the main switch to REC.
3 Press the still image
shooting button [ ].
h The image is captured.
31
31
31
1:10:15
1:10:15
1:10:15
ON/OFF button
Main switch
Video clip
recording button
[]
Still image
shooting button
[]