EasyManua.ls Logo

Sanyo Xacti VPC-CG20 - Page 67

Sanyo Xacti VPC-CG20
75 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
APPENDICES
English 58
Range Normal mode:
50 cm (19.69 in.) to infinity
Super macro mode:
1cm (0.39in.) to
80 cm (31.50 in.)
(wide end only)
Digital zoom For shooting:
1× to approx. 12×
For playback:
1× to 62.5× (varies with resolution)
Shutter speed Still image shooting mode: 1/2 to 1/1,500 sec.
(Approx. 1 sec. max. when scene select function
is set to lamp Q)
(During flash: 1/30 to 1/1,500 sec.)
Sequential shots mode: 1/30 to 1/1,500 sec. (no
flash)
Video clip recording mode: 1/30 to 1/10,000 sec.
(1/15 sec. max. when scene select function is set
to lamp Q or the high sensitivity mode)
Sensitivity Still image shooting (standard output sensitivity*)/
video clip recording mode:
Auto (video clip recording: ISO 50 to 1600; still
image shooting: ISO 50 to 400)/ISO 50, ISO 100,
ISO 200, ISO 400, ISO 800, and ISO 1600
(switchable from the Recording Menu)
h Sensitivity measured in compliance with the
ISO standard (ISO 12232:2006).
h Maximum ISO sensitivity up to 1600 equivalent
when Scene Select function is set to Q.
Minimum subject
illumination
16 lux (1/30 sec. in the scene select AUTO mode)
4 lux (1/15 sec. in the HIGH SENSITIVITY or lamp
mode)
Image stabilizer Video: Electronic
Still image: Multi-calculation electronic
Monitor 2.7" (6.9 cm) low-temperature polysilicon TFT color
wide liquid crystal (transmissive), approx.
230,000 pixels
Flash working
range
GN = 4.0
Approx. 50 cm (19.69 in.) to 2.3 m (7.55 ft.) (wide)
Approx. 80 cm (31.50 in.) to 2.2 m (7.22 ft.) (tele)
Flash modes Auto-flash, forced flash, flash off
Focus TTL-type AF (still image shooting mode: 9-point
range finder/spot focus; video clip recording mode:
Continuous focus), manual focus
Self-timer Approx. 2-second delay, 10-second delay

Table of Contents

Related product manuals