Sanyo Xacti VPC-CG9 - Page 55

English 48
SETUP
1 Movie stabilizer (page 90)
h Compensate for camera shake
during video clip recording.
2 Photo stabilizer (page 90)
h Compensate for camera shake
during still image shooting.
3 Focus range (page 93)
h Select the focus range that
corresponds to the distance to
the subject.
4 Focus mode (page 95)
5 Light-measuring mode
(page 96)
6 ISO sensitivity (page 97)
* The indicated ISO value is the
standard output sensitivity.
7 Remaining battery power
(page 153)
p: Shoot using the video clip
field of view display.
q: Shoot using the still image
field of view display.
]: Image stabilizer function
off.
\: Shoot with image stabilizer
on.
]: Shoot without image
stabilizer.
-: The camera automatically
focuses on the subject
within a range of 10 cm
(3.94 in.) to infinity (total
range).
*: The camera automatically
focuses on the subject
within a range of 80 cm
(31.50 in.) to infinity
(normal).
-: Set the focus distance
manually (manual).
+: The camera focuses on the
subject within a range of
1 cm (0.39 in.) to 80 cm
(31.50 in.) (super macro).
B: 9-point range finder focus
C: Spot focus
X: Multi-section light
measuring
W: Center-weighted light
measuring
Y: Spot light-measuring
=: Sensitivity is set
automatically
*: Sets sensitivity to ISO 50
u: Sets sensitivity to ISO 100
v: Sets sensitivity to ISO 200
w: Sets sensitivity to ISO 400
6: Sets sensitivity to ISO 800
-: Sets sensitivity to ISO 1600