3 Select "COMPUTER", and press the SET button.
• The screen to select the computer connection mode appears.
4
Select "CARD READER", and press the SET button.
• The message [Found New Hardware] appears in the task tray,
showing that the camera is recognized as a drive.
• The card is recognized (mounted) as a disk, and the [XACTI (E:)] icon
appears in the [My Computer] window.
• The drive name (E:) may be different on your computer.
5
Copy the files from the card to the computer's hard disk.
• The data recorded with your camera are stored in the following folder.
You can specify the folder on the hard disk to which to copy the files.
XACTI (E:)\DCIM\***SANYO
(*** represents numbers [page 12 in the Xacti Software CD
INSTRUCTION MANUAL]).
• The drive name (E:) may be different on your computer.
English X
To Next Page
Loading...
