PREPARING THE POWER
Recharging takes place only when the camera is turned off, or when the
power save function or the sleep function has been activated. Recharging
does not take place when the camera is in the recording mode or playback
mode.
During camera use, if the temperature of the battery or inside the camera
(excluding the battery) rises, a temperature alert icon _ will appear as
described below.
• When the battery or internal camera (excluding battery) temperature
rises during use
• During camera use, if the temperature of the battery or inside the
camera (excluding the battery) rises, a _ icon lights on the monitor. It
is still possible to record and play back even when the _ icon is lit;
however it is advised that you discontinue use as soon as possible and
turn the camera off.
• If the temperature rises further, the _ icon will start to flash, and the
camera will turn off automatically.
The camera cannot be turned on until the temperature has dropped (or
as long as the [_ icon remains flashing). Please wait until the
temperature has dropped before resuming use.
• During video recording, a countdown indicator will show the time
starting about 15 seconds before shutdown. When the indicator shows
0 seconds, recording stops.
• If the camera is turned off while the temperature is high (that is, while
the _ icon is flashing), it cannot be turned on again until the
temperature has dropped (or as long as the _ icon remains flashing).
39 English
To Next Page
Loading...
