PREPARING THE POWER
5
Close the camera's monitor unit,
and set the camera in the docking
station.
• Set the camera securely, making
sure that the camera is correctly
oriented in relation to the terminal
contacts in the docking station.
• Charging begins when the camera
is set in the docking station.
• During charging, the multi-
indicator is lit red. When charging
is completed, the indicator turns
off.
• If the multi-indicator flashes red, it
indicates that the battery pack is
defective or the camera is not
correctly set in the docking station.
Reset the camera correctly in the
docking station.
• The charging time is approx.
200 minutes.
• Charging is executed when the
battery temperature is
approximately 0 to 35 °C (32 to
95 °F). If the battery temperature
exceeds 35 °C (95 °F), the safety
mechanism will operate to
automatically interrupt charging.
The multi-indicator flashes red in
this case also. After the battery
cools down, charging begins
again, and the multi-indicator lights
red.
• The AC adaptor (supplied) can be
connected to the camera's DC IN
terminal to charge the battery.
Multi-indicator
Docking station terminal
35 English
To Next Page
Loading...
