Sanyo Xacti VPC-HD2000 - Video and Photo Stabilizer; ISO Sensitivity Settings

(_) Video stabilizer (page 103)
• Compensate for camera shake
during video clip recording.
[_]: Record with image
stabilizer on.
_: Record without image
stabilizer.
@ Photo stabilizer (page 103)
• Compensate for camera shake
during still image shooting.
[_]: Shoot with image stabilizer
on.
_: Shoot without image
stabilizer.
Q Focus range (page 104)
• Select the focus range that
corresponds to the distance to
the subject.
[_]: The camera automatically
focuses on the subject with
a range of 50 cm (19.69 in.)
to infinity (normal).
[_]: The focus can be set
manually.
[_]: The camera focuses on the
subject within a range of
1 cm (0.39 in.) to 1 m
(3.28 ft.) (super macro).
(_ Focus area (page 105)
[_]: 9-point range finder focus
_: Spot focus
0 Light-measuring mode
(page 105)
_: Multi-section light
measuring
[_: Center-weighted light
measuring
[_: Spot light-measuring
0 ISO sensitivity (page 106)
[_: Sensitivity is set
automatically (video clip
recording: ISO 50 to 800;
still image shooting: ISO 50 ,-I
to 200) C
[]_: Sets sensitivity to ISO 50
[_]: Sets sensitivity to ISO 100
_: Sets sensitivity to ISO 200
[_]: Sets sensitivity to ISO 400
[_]: Sets sensitivity to ISO 800
_: Sets sensitivity to ISO 1600
_: Sets sensitivity to ISO 3200
(video clip recording:
ISO 1600)
• The indicated ISO value is the
standard output sensitivity.
(_ Remaining battery power
indication (page 155)
English 62