Using the supplied CD-ROM (Xacti Software CD), you can store your
captured images on a DVD. Detailed information about the Xacti
Software CD can be found on page 4 in the Xacti Software CD
INSTRUCTION MANUAL.
Install application programs
1 Set the supplied CD-ROM in your computer's DVD drive.
• The installation window opens.
2
Click on [Nero 8 Essentials].
• After clicking on an application program, follow the instructions shown
on the monitor to install the program.
• Nero 8 Essentials works with both Windows XP and Windows Vista.
For detailed information concerning the operating environment,
please see page 5 in the Xacti Software CD INSTRUCTION MANUAL.
3
In the installation window, click on [Finish] and remove the CD-ROM
from the computer's DVD drive.
<Using Blu-ray Disks/AVCHD>
• The supplied Nero 8 Essentials cannot be used to record Blu-ray
Disks or AVCHD.
• To record Blu-ray Disks or AVCHD, please upgrade the Nero 8
Essentials software (a paid-for service).
• Note that your computer must be connected to the Internet in order to
complete this procedure.
• Please see the Sanyo support page (page 16 in the Xacti Software
CD INSTRUCTION MANUAL) or visit the following website for more
information.
http://www.sanyo-d sc.com/
<About the Kodak online service>
• When the installation window closes, a dialog box to connect to the
website introducing Kodak's online service appears. Check the [No
thanks!] option button, and then click on the [OK] button.
English VIII
To Next Page
Loading...
Need help?
General