3 Select the desired flash operation, and press the SET button.
• This completes the flash operation setting.
4 Press the [ O ] button to take the picture.
CAUTION
Do not touch the flash unit when shooting
• The flash unit becomes very hot and may cause a burn. Avoid touching the __..
flash unit when shooting.
HINT
• The flash cannot be used during video clip recording. ¢0
-r"
• By assigning an operation shortcut to the SET button (pages 138 and O
142), you can change the flash mode from the Recording Screen (in the O
NORMAL mode).
63
English 78
To Next Page
Loading...
