18
Weighing
Turning the Display On and Off (Standby Mode)
Press the
ON/OFF
key
(16)
to turn the display on or off.
Self-Test
After the balance is turned on, an automatic self-test of the scale's
electronic circuitry is performed.
This self-test ends with the readout "0.0 g/0.00 g/0.000 g or 0.0000 g"
depending on the balance model.
Taring
For exact weight determination, press the tare control
(15)
to zero the
weight display. You can tare within the entire weighing range of the
balance.
Weight Determination
Place your sample or obJect on the weighing pan
(1)
.
Read off the weight indicated in the display
(12)
only after the weight
unit ("g" or another unit if selected - see the chapter entitied "Balance
Operating Menü") appears as the stability symbol.
To Next Page
Loading...
