13
Example
Determine an unknown percentage; store the weight on the balance/scale as a reference
percentage
Settings (changes in the factory settings required for this example):
Menu: Application program: Weighing in percent (menu code 2. 1. 5)
Menu: Reference percentage 100 % (menu code 3. 3. 5)
Step Key (or instruction) Display/Printout
11. Turn on the balance/scale e
12. Tare the balance/scale t 0.0 g
13. Display the reference
percentage v > 2 sec. ref 100
14. Place the reference weight + 222.5 g
for 100% on the balance/scale
(here: 222.5 g)
15. Start application; if the print v + 100.00 %
format is set to include data
ID codes,
the following is printed:
Wxx% + 222.500 g
16. Place an unknown weight + 144.94 %
on the balance/scale
(here: 322.5 g)
17. Display weight v + 322.5 g
18. Display percentage v + 144.94 %
19. Unload the balance/scale 0.00 %
10. Delete the reference percentage c
11. Repeat the procedure starting
from step 6, if desired.
To Next Page
Loading...