21
Care and Maintenance
Service
Regular servicing by a Sartorius technician will
extend the service life of your balance/scale and
ensure its continued weighing accuracy. Sartorius
can offer you service contracts, with your choice of
regular maintenance intervals ranging from 1 month
to 2 years. The frequency of the maintenance inter-
vals depends on the user’s operating conditions and
the tolerance limits.
Repairs
Repair work must be performed by trained service
technicians. Any attempt by untrained persons
to perform repairs may lead to hazards for the user.
Cleaning
!Disconnect the balance/scale from the AC adapter
and unplug any interface cables that are connected
to the balance/scale
!Make sure that no liquid enters the balance/scale
housing
!Do not use any aggressive cleaning agents (solvents
or similar agents)
§ Clean the balance/scale using a piece of cloth which
has been wet with a mild detergent (soap)
§ After cleaning, wipe down the balance/scale with
a soft, dry cloth
Removing and Cleaning the Weighing Pan:
● Lift up and remove the weighing pan together
with the pan support by gripping them from under
the shield ring. Make sure that you do not damage
the weighing system in doing so.
To Next Page
Loading...