Sartorius Basic lite - Configuring the Balance;Scale; Setting Parameters via Menu Codes

18
Configuring the Balance/Scale
Setting the Parameters (Menu Codes)
You can configure your Basic
lite
balance or Gem
lite
scale to meet individual requirements
by selecting from the parameters available in the menu.
Example: Adapt the balance/scale to unstable ambient conditions:
Menu code 1 1 4
Step Key (or instruction) Display
1. Turn off the balance/scale e
2. Turn the balance/scale back on; e
while all segments
are displayed: t briefly 1.
$ To navigate within a menu t 2.
level; the last menu option is repeatedly ...
followed by the first option 9.
1.
3. Select the 2nd menu level p 1. 1.
4. Select the 3rd menu level p 1. 1. 2 o
5. In Menu Level 3: t
Select the desired option repeatedly 1. 1. 4
6. Confirm new setting;
the “o” indicates the currently set p
option for 2 sec. 1. 1. 4 o
$ Select the next menu level
(here: move from the 3rd to
the 1st level) p 1.
$ Set other menu codes, if desired p, t
7. Store parameter settings t
and exit operating menu for 2 sec.
or
$ Exit operating menu without
storing changes e
> Restart the application 0.0 g