12
Weighing in Percent
Purpose
This application program allows you to obtain
weight readouts in percent which are in proportion
to a reference weight.
Available Features
– Store the current weight value to have it loaded
as the preset reference percentage next time you ini-
tialize the Weighing in Percent application
– The reference percentage can be changed
in the operating menu:
See “Configuring the Balance/Scale”
– The reference percentage is automatically
output via the optional data interface port after ini-
tialization, if the menu code for “Printout
with data ID codes” is set
– Press v to toggle the display between
percentage and weight
Factory Settings
Reference percentage: 10 (menu code 3. 3. 2)
Preparation
§ Configure the Weighing in Percent application
in the operating menu:
See “Configuring the Balance/Scale”
Menu code 2. 1. 5 Weighing in percent
§ Reference percentage:
Menu code 3. 3. 1 5 %
Menu code 3. 3. 2 10 %
Menu code 3. 3. 3 20 %
Menu code 3. 3. 4 50 %
Menu code 3. 3. 5 100 %
See also “Configuring the Balance/Scale”
To Next Page
Loading...