Sartorius Basic lite - Balance;Scale Operating Menu Overview

19
Balance/Scale Operating Menu (Overview)
ο Factory setting
√ User setting
Menu 1. Balance/ 1.1. Adapt filter 1.1.1 Minimum vibration
scale functions 1.1.2 ο Normal vibration
1.1.3 Strong vibration
1.1.4 Extreme vibration
1.3. Stability range 1.3.1 1/4 digit
1.3.2 1/2 digit
1.3.3 1 digit
1.3.4 ο 2 digits
1.3.5 4 digits
1.4. Weight unit for 1.4.1 ο Grams
calibration weight** 1.4.2 Kilograms
1
)
1.4.3 Pounds
1.6. Auto zero 1.6.1 ο On
1.6.2 Off
1.7. Weight unit 1 See “Toggle between Weight Units”
1.8. Display accuracy 1.8.1 ο Standard resolution
1.8.3 Increased resolution
2. Application 2.1. Program selection see the desired application program
programs description
3. Application 3.1. Weight unit 2 see “Toggle between Weight Units”
parameters 3.2. Display accuracy 3.2.1 ο Standard resolution
3.2.3 Increased resolution
3.3. Reference qty or % see the desired application program
description
5. through 7. applies only if an interface is installed; see the corresponding instructions
8. Extra functions 8.1. Menu 8.1.1 ο Parameter settings: alterable
8.1.2
Parameter settings: read only
8.2. External switch function applies only if an interface is installed;
see the corresponding instructions
8.3. Power-on mode 8.3.1 Off/on (battery shuts off
automatically after 3 min)
8.3.2 ο Standby/on
9. Reset menu 9.– Factory settings 9.– 1 Reset
9.– 2 ο Do not reset
* = only for GM models
** = only for BL models
1
) = not for models with a readability of 0.1 mg⁄
Menu level 1
Menu level 2
Menu level 3
Factory setting
Menu level 4