Animal Weighing/Averaging
Animal Weighing/Averaging Code 2 1 7
Symbol displayed: m
Use this program to determine the weights of live animals or weights under
unstable ambient conditions. In this program, the balance calculates the weight as
the average of a selectable number of individual weighing operations.
During averaging, the number of remaining individual subweighing operations
is shown on the application display in a “countdown” mode.
Once all subweighing operations have been performed, the calculated mean
value is indicated as a stable readout on the weight display.
Manual or Automatic Start Mode
Depending on the menu code you select, animal weighing will be started
automatically or manually by pressing a key.
If you select the “automatic mode,” you will have to press v to start the program
for averaging the first weight. You can press c to interrupt a weight
measurement in progress at any time. In the “automatic mode,” the symbol
“AUTO” will be displayed during weight measurement. The result is locked into
the display. The ”m” symbol or “AUTO” flashes during this time. The readout will
stop flashing after you have unloaded the balance, and the next weight will
be displayed.
Animal weighing/averaging will start by Code
Manual mode 3 8 1
Automatic mode 3 8 2*
Once averaging has been completed, the program will stop until the balance is
unloaded to half the value (50 display increments) of the storage threshold.
* = factory setting
47
To Next Page
Loading...
Need help?
General