This Directive also regulates the performance of the
EC verification by the manufacturer, provided that an
EC Type-Approval Certificate has been issued and the
manufacturer has been accredited by an officer of
a Notified Body registered at the Commission of the
European Community for performing such verification.
The legal basis allowing Sartorius to perform EC
verification is constituted by the EC Council Directive
No. 90/384/EEC on non-automatic weighing
instruments that has been in effect since January 1,
1993, in the In ter na l Mark et a s well as by t he
Certificate of Accreditation of the Sartorius AG
Quality Management System issued by the Metrology
Department of the Regional Administration Office of
Lower Saxony, Germany (“Niedersächsisches
Landesverwaltungsamt – Eichwesen”) on February
15, 1993
For information on the C marking on Sartorius
equipment and legal regulations currently applicable
in your country, and to obtain the names of the
persons to contact, please ask your local Sartorius
office, dealer or service center.
89
To Next Page
Loading...
Need help?
General