Sartorius Combics 3 CAIS3 User Manual

49
Display in Weighing Mode
Weighing Mode: Display of Measured and Calculated Values
The display is divided into several sections.
Lines for metrological data
The following parameters are shown here:
Max Maximum capacity (upper weighing range limit) of the active weighing
platform
Min Minimum capacity (lower weighing range limit) of the active weighing
(verified models only)
e Verification scale interval of the active weighing platform (verified models only)
d Smallest display digit of the active weighing platform
R1 R2 Display of the current weighing range of the active weighing platform
(with multiple range scale connected)
Symbols and Their Meaning
F The Busy symbol appears when the scale is processing a function activated
by pressing a key.
+ - The plus or minus sign of the weight or other measured value
A Verified models only:
Identifies “zero” as a weight value (after the scale or the active weighing
platform has been zeroed)
Measured Value Line/Calculated Values
5.23r The current weight value (on verified scales or platforms with e = d, the last
digit is bordered for identification)
20 A calculated value when using an application program, such as Counting or
Weighing in Percent
Unit and Stability
g The current weight unit (e.g. “g")
pcs Identifies additional characteristics (e.g. “pieces" for the “Counting"
application)
When the weighing system reaches stability, the weight unit or calculation unit is
displayed here.
Data in Tare Memory, Calculated Value, Identification of the Active Weighing
Platform when More Than One Platform is Used
a Identification of calculated values (values not used in legal metrology)
B/G NET Indicates gross value or net value (data in tare memory)
PT Indicates manual tare input (using a barcode scanner) when viewing tare
information.
WP1 Display of the active weighing platform when 2 platforms are connected.
The display flashes for a ISO Cal adjustment prompt if WP 1 is an IS-weighing
platform.
WP When the timer is active (Setup:Device Parameters:
Operating Parameters:Timer), the symbol flashes to indicate
that the set time has halfway expired.
Operating Design
Lines for metrological data
Bar graph
Text lines
Soft key labels
Line for measured values
Plus or minus sign
Stability
Battery symbol
Application symbol
Unit
Tare memory
Calculated values
Info/Status line

Sartorius Combics 3 CAIS3 Specifications

General

Brand	Sartorius
Model	Combics 3 CAIS3
Category	Accessories
Language	English