18
isoCAL function o Off
Adjustment prompt
Activate ext. o Activated
adjustment3) Deactivated
Parameter for Cal./adj. weight
external weight Linearization weight 1
Linearization weight 2
Linearization weight 3
Linearization weight 4
Adjust without Input parameters Nominal load
weights Resolution
Sensitivity for load cell 1
or mean value
for all load cells
Sensitivity for load cell 2
Sensitivity for load cell 3
Sensitivity for load cell 4
Save parameters
Geographical data Input parameters Geographical latitude
Elevation
Gravitational acceleration
Save parameters
For menu items „Adapt Filter“ through „Factory settings see „Operating Menu
for weighing parameters“: Overview (Parameters)“
in „Configuring the Combics“
Device parameters „COM1“ through „Terminal data“: see next page
WP-1 WP-1
WP-1 WP-1
WP-1
Internal Internal
Internal Internal
Internal
Calibration/Adjustment Calibration/Adjustment
Calibration/Adjustment Calibration/Adjustment
Calibration/Adjustment
1
) function will be made available in future
2
) availability of menu items depends on the software and on the functionality of the connected weighing platform
3
) menu item not available on scales verified for use in legal metrology
To Next Page
Loading...
Need help?
General
