Sartorius CW3P Service Manual

19
Setup Device WP1Setup Device WP1
Setup Device WP1Setup Device WP1
Setup Device WP1
see previous page see previous page
see previous page see previous page
see previous page
(Device parameters)
Enter the service COM-1 o Off
password for access WP2 o RS-232 SBI standard
SBI verifiable
o IS-232 3) (see menu „WP1- RS-232- IS-232“).
ADC-232 3) (see menu „WP - Internal“ 2)).
Data communications
Printer 1 (see „Operating Menu Overview (Parameters)“ in the chapter
Printer 2 entitled „Configuring the Combics“)
External Alibi memory
COM2 o Off
WP2 RS-232 SBI standard
SBI verifiable
o IS-232 3) (see menu „WP1- RS-232- IS-232“).
ADC-232 3) (see menu „WP - Internal“ 2)).
o RS-485 o IS-485 (see menu „WP1- RS-232- IS-232“).
ADC-485 (see „WP1 - Internal“ menu2)).
Data communications
Printer 1
Printer 2 (see „Operating Menu Overview (Parameters)“ in the chapter
External Alibi memory entitled „Configuring the Combics“)
External multi-I/O converter
UniCOM
Control input
Bar code
Config. printout (see „Operating Menu Overview (Parameters)“ in the chapter
Operating parameters entitled „Configuring the Combics“)
Clock
Password
Service Service date
Memory number Memory no.
Terminal data Serial no.
Model
}
}
}
1
) function will be made available in future
2
) availability of menu items depends on the software and on the functionality of the connected weighing platform
3
) menu item not available on scales verified for use in legal metrology

Sartorius CW3P Specifications

General

Brand	Sartorius
Model	CW3P
Category	Accessories
Language	English