Internal Calibration
Step Key (or instruction) Display
1. Tare the balance. w
0.0 g
2. Start calibration. q
C
The internal weight is CAL
applied automatically.
3. The balance is calibrated –
0.2 g
(displayed only if menu CAL ± G
code 1 10 2 is set).
4. If the “Calibrate, then
Adjust*
auto adjust" setting is CAL
selected (1 10 1), the balance
is now adjusted automatically.
5. The calibration sequence is completed.
CC
CAL
6. The internal weight is removed.
0.0 g
* = displayed only if menu item 1 10 2 is selected.
21
To Next Page
Loading...
