Sartorius LP Models - Practical Example: Weighing in Percent; Weighing in Percent with Balance Reference

38
Practical Examples
Example P1: Weighing in Percent with Reference Weight Taken from Weight on Balance
Step Key (or instruction) Display/Output
1. Select the weighing-in-percent see “Preparation”
application in the Setup menu
2. Prepare a container for the parts Place the empty container
on the balance
3. Tare the balance t
4. Place the reference weight Place weight equal
on the balance to reference weight in
(here: 1821.48 g =100%) the container
5. Initialize the balance start soft key v
6. Unload the balance Remove reference weight
from the container
7. Determine the percentage Place sample to
of an unknown weight be measured in the container
8. If desired, print percentage p
(here: 98.37%)
wxx%=182148.
wxx%=182148.
wxx%=182148.
pRef + 100 %
Wxx% + 1821.48 g
Prc + 98.37 %