44
Practical Example
Determining Animal Weight with Automatic Start of 20 Subweighing Operations for Averaging;
Automatic Printout of the Number of Subweighing Operations and of the Animal Weight
Step Key (or instruction) Display/Output
1. Select the animal weighing see “Preparation”
application in the Setup menu
2. Set the following animal weighing
parameters in the Setup menu:
– Animal activity: Active Setting 3 7 3 in Setup menu
– Start animal weighing: Automatic Setting 3 8 2 in Setup menu
– Printout: On: anim.wt.*fact. Setting 3 9 3 in Setup menu
– Print: All parameters Setting 7 1 2 in Setup menu
3. Prepare a container (cage) Place empty cage on
the balance
4. Tare the balance t
5. Enter number of subweighing 2 0
operations for averaging
6. Save number mdef soft key w
7. Weigh the first animal Place 1st animal in cage weight value fluctuates due to animal activity
8. Start automatic animal weighing start soft key v
mdef= x10 start
mdef= x10 start
mdef= 20 start
mdef= 20 start
M =-20xxxxx---
mul mdef S-id
To Next Page
Loading...