Operating Instructions PMA 35001-X 17
Menu Settings
Menu Settings
Accessing the SETUP Menu
Example:
Menu Item: Adapting the Scale to the Installation Point
t Hold down the L key [ENTER] for approximately 2 seconds; “SETUP" is
displayed (level one).
t Use the RS keys to select the desired menu item for level one.
t Press the L key [ENTER] to select the next menu level (level two).
t Call up the desired menu item in level two.
Use the RS keys to select the desired menu item.
t Use the L key [ENTER] to select the next menu level (level three).
t The third level menu is displayed. Use the RS keys to select the desired menu
item.
t Press the L key [ENTER] to select the next menu level (level four).
t Call up the desired menu item in level four. Use the RS keys to select the
desired menu item.
(This concludes the example.)
t Press the L key [ENTER]; “o" is displayed, indicating that this new item is set.
t Press the c key (Clear) repeatedly to exit the menu.
Note:
Contact your local Sartorius office for a detailed list of the menu codes.
To Next Page
Loading...
Need help?
General