Operating Instructions PMA 35001-X 5
Intended Usage
Intended Usage
The PMA35001-X is a scale designed for use in paint-mixing applications. The
scale can be operated via the keypad as a stand-alone device or using application
software (such as a paint-mixing program from a paint manufacturer) installed on
a connected PC.
If you wish to create your own application software, Sartorius can supply the
required drivers for Windows operating systems.
Make sure to read and store these installation instructions carefully before
installing and operating your paint-mixing scale.
Safety Instructions
This device meets stipulated safety requirements. Improper use or handling,
however, can result in damage and/or injury. The manufacturer is not responsible
for any damage caused by non-compliance with warnings or safety instructions.
– The requirements pertaining to applicable installation regulations must be
followed when using electrical equipment in systems and environmental
conditions with increased safety requirements.
Use of the paint-mixing scale is not permitted in legal metrology or in medical
areas or hazardous areas containing dust or explosive materials.
– The intrinsically safecolor-mixing scale has been manufactured in accordance
with the European standards of CENELEC (see “EC Type Examination
Certificate" in the appendix).
The color-mixing scale can be used with intrinsically safe Sartorius accessories
in Zone 1 areas. (see: “Verification of Intrinsic Safety", cert. no: 36953-761-60).
To Next Page
Loading...
Need help?
General