Operating Instructions PMA 35001-X 23
Care and Maintenance
Service
Regular servicing by a Sartorius technician will ensure continued functional safety.
Sartorius offers its customers service contracts with regular maintenance intervals
ranging from 1 month to 2 years.
The maintenance interval depends on operating conditions and requirements.
Repairs
Disconnect defective equipment from power supply immediately.
Repair work must be performed only by authorized Sartorius service technicians
using original replacement parts. Repairs performed by untrained persons may
result in considerable hazards for the user.
Safety Inspections
Safe operation of the device is no longer ensured when:
– the device has visible damage or is no longer working;
– it has been stored for a relatively long time under unfavorable conditions.
In this case, notify the Sartorius Service Center. Maintenance and repair work
mayonly be performed by authorized service technicians who have access to the
required maintenance manuals and instructions and have attended relevant service
training courses. If you are sending your scale to be repaired:
t remove as much paint residue as possible and disconnect all cables before
sending, in order to avoid any further damage;
t enclose a description of the error.
Cleaning
Prevent moisture from penetrating the interior.
Do not use aggressive cleaning agents. Never use concentrated acids,
alkalisolutions or pure alcohol to clean the equipment.
Spraying the device with water or blowing it with compressed air is not
permissible.
t Turn off the device before cleaning the control unit, since touching the screen
could trigger unwanted inputs.
t Use a damp, lint-free cloth to clean the device.
Care and Maintenance
To Next Page
Loading...
Need help?
General