Operating Instructions PMA 35001-X 19
Menu Settings
I Configuring the Toggle Key Function
Pressing the toggle key I toggles the scale between the default unit (see previous page) and the unit
defined as follows under SETUP > APPLICATION > UNIT.
Level 1 Level 2 Level 3 Level 4 Setting
SETUP Press the L key [ENTER]
APPLICATION Use the RS keys to select
“APPLICATION”
UNIT Press the L key [ENTER], press S to
select “UNIT” and press L [ENTER] to
confirm.
o PT./PD. Use the RS keys to select the desired
unit; e.g., “GRAMS”
GRAMS Press the L key [ENTER]; o indicates
the active setting
Press the c key (Clear)
Activating the “LOCK” Function
The LOCK function protects the scale from unauthorized use. When this function is active, the scale
readout shows weight values only when there is active communication between the scale and a PC.
If communication is interrupted, the readout goes blank and the display shows a padlock symbol. The
LOCK function is activated under “Extras.”
Level 1 Level 2 Level 3 Level 4
SETUP Press the L key [ENTER]
EXTRAS Use the RS keys to select “EXTRAS”
Press the L key [ENTER]
LOCK Use the RS keys to select “LOCK”
Press the L key [ENTER]
OFF Use the RS keys to select ON and
o ON press L to confirm
Press the c key (Clear) repeatedly to exit
the menu.
To Next Page
Loading...
Need help?
General