Operating Instructions PMA 35001-X 21
Menu Settings
Configuring the Text Length (“LONG” or “SHORT”)
You can define the length of the operator guidance texts shown on the display.
Level 1 Level 2 Level 3 Level 4 Setting
SETUP Press the L key [ENTER]
EXTRAS Use the RS keys to select “EXTRAS”
Press the L key [ENTER]
TEXTS Use the RS keys to select “TEXTS”
Press the L key [ENTER]
LONG Use the RS keys to select “SHORT”
o SHORT and press L to confirm
Press the c key (Clear) repeatedly
to exit the menu
Resetting the Scale (“RESET”)
You can restore the factory settings on the scale.
Note:
If you have activated the password function, this feature is password-protected.
Level 1 Level 2 Level 3 Level 4 Setting
SETUP Press the L key [ENTER]
RESET Use the RS keys to select “RESET”
Press the L key [ENTER]
MENU Use the RS keys to select “MENU”
Press the L key [ENTER]
YES Use the RS keys to select “YES”
o NO Press the L key; factory settings are
restored and “MENU” is displayed
Press the c key (Clear) repeatedly
to exit the menu
Code Settings
Select the “CODES” setting to have menu items identified by numeric codes (1.1.1.1.) rather than texts.
Level 1 Level 2 Setting
LANGUAGE Press the R key to select “LANGUAGE”
Press the L key [ENTER]
GERMAN Use the RS keys to select “CODES”
etc. Press the L key [ENTER]; o indicates
o CODES the active setting
Press the c key (Clear) repeatedly
to exit the menu
Note:
Contact your local Sartorius office for a detailed list of the menu codes.
To Next Page
Loading...
Need help?
General