t Select D to tare.
t Select w.
t Place the sample on the weighing pan.
Max 2100 g d
=
0.01 g
193.19
END
+
G
Min g
190.00
Max g
195.00
y The weight value is displayed.
The colored bar indicates whether the weight value falls within the thresholds:
– Yellow: The weight value is too low.
– Green: The weight value is OK and falls within the specified range.
– Red: The weight value is too high.
t Add the sample to the weighing pan until the desired value is reached, or place
other samples, if any, on the weighing pan for checkweighing.
t To exit the function, select x.
y The application returns to its original state.
There is an online animation for this application. Click here to view it:
To Next Page
Loading...
