Sartorius Quintix User Manual

9
Getting Started
User Manual Secura
®
, Quintix
®
, Practum
®
4. Getting Started
The balance must be disconnected from the mains power for all assembly work.
4.1 Unpacking and Equipment Supplied
t Open the packaging, making sure to remove all parts carefully.
t After unpacking the device, check it immediately for any external damage.
y If you detect any damage, proceed as directed in the chapter entitled “Care and
maintenance.”
y Save the box and all parts of the packaging for any future transport. During
shipment, please do not leave cables plugged in!
The following parts are included in the equipment supplied:
Components Balance with Draft Shield Precision Balances
Readability: 0.1 mg 1 mg 10 mg, 0.1 g, and 1 g
Draft shield
 
–
Weighing pan:
d 90 mm

– –
Weighing pan:
d 120 mm –

–
Weighing pan:
d 180 mm – –

Pan support
  
Shield disk (precision balances) – –

Pan draft shield (Secura
®
only)

– –
AC adaptor with country-specific
power plug
  
In-use dust cover
  
Dust cover
 
–
Installation and operating
instructions
  
Application guide
  

Sartorius Quintix Specifications

General

Display	Backlit LCD
Response Time	1.5 s
Operating Temperature	+10°C to +30°C
Readability	0.1 mg to 1 g
Calibration	Internal/External
Connectivity	RS-232, USB
Repeatability	0.1 mg
Linearity	±0.2 mg
Operating Humidity	15% to 80% non-condensing
Power Supply	100 – 240 V, 50/60 Hz
Pan Size	Varies by model, typically 90 mm diameter (round) or 190 x 204 mm (rectangular)