t To display the current weight value, select the Hold button on the weighing
display.
y The current weight value is displayed.
t To change back to viewing the peak hold (max. value), select the G or possibly
Net button again.
t Remove the sample from the weighing pan.
y In the “Hold” display mode the balance displays the peak hold (max. value) for
another five seconds before switching back to zero.
t Place additional samples, if any, on the weighing pan.
t To exit the function, select x.
y The application returns to its original state.
There is an online animation for this application. Click here to view it:
To Next Page
Loading...
