Special Outputs
Position 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
* * * * * * – – * * * * * * CR LF
or * * * * * * L o w * * * * * CR LF
or * * * * * * H i g h * * * * CR LF
* Space Cal.Ext. External adjustment
– – Final readout Cal.Int. Internal adjustment
Low Underweight CR Carriage return
High Overload LF Line feed
Error message
Position 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
* * * E r r * */# # # * * * * CR LF
* Space ### Error number
Example: Output of the weight value + 111.255 g
Position 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
* * * 1 1 1 . 2 5 5 * g * * CR LF
+ * * 1 2 3 . 5 [ 6 ]
1)
g * * CR LF
Position 1: Plus +, minus –, or space
Position 2 – 10: Space or weight value with decimal point;
leading zeros are output as spaces.
Position 11: Space
Position 12 – 14: Characters for unit of measure or space
Position 15: Carriage return
Position 16: Line feed
1)
Settings “PC – SBI” and “USB RS232 SBI” for the identification of digits not verified
for use in legal metrology:
In the setting “SBI”, there is no automatic identification of display digits not
verified for use in legal metrology. Corresponding measures or settings must be
carried out on the peripheral device.
To Next Page
Loading...
