Sartorius Talent TE2101 User Manual

WTE5001-e03101
Service Manual
Sartorius Talent | Gem, Gold
TE Models
Electronic Analytical and Precision
Balances and Precious Metal Scales
Including Service Specification Sheets

Sartorius Talent TE2101 Specifications

General

Capacity	2100 g
Weighing Principle	Electromagnetic force compensation
Display	LCD
Stabilization Time (typical)	2 seconds
Power Supply	AC adapter
Calibration	External
Interface	RS-232

Summary

Generals Information

Important Information

Safety and qualification requirements for servicing balances/scales.

General Notes and Service Guide

Service Guide Procedures

BPI Mode and Write-Protect Management

Covers activating BPI mode and deactivating write-protection.

Service Procedures, Software, and Hardware

Write-Protect Management and PCB Replacement

Covers resetting write-protect, and the process for replacing the main PCB.

Software Usage for Adjustments

Menu Access Switch Operation

Operating Menu: Accessing and Changing Settings

Menu Code Settings: Changing Codes

Menu Code Settings (Version 19.41): Weighing, Filter, Stability, Units

Menu Code Settings (Version 19.41): Program Selection and Parameters

Menu Code Settings (Version 19.41): Data Interface and Printouts

Menu Code Settings (Version 19.41): Reset and Access Functions

Resetting Menu to Factory Settings

Explains how to restore menu settings to factory defaults.

Activating BPI Mode

BPI Mode Connection and Confirmation

Strain Gauge Systems: Preparations and Testing

Strain Gauge Systems: Checking Sequence

Checking the Overload Stop

Procedure for checking the overload stop, requiring service software.

Strain Gauge Systems: Performing Overload Stop Check

Strain Gauge Systems: Zero-point Offset Value Adjustment

Adjusting the Zero-point Offset Value

Explains the necessity and procedure for adjusting the zero-point offset.

Strain Gauge Systems: Repeatability Check

Checking Repeatability

Strain Gauge Systems: Off-center Error Procedures

Checking Off-center Error

Adjusting Off-center Error

Strain Gauge Systems: Span Adjustment Methods

Strain Gauge Systems: Linearity Adjustment

Checking Linearity

Adjusting Linearity

Double Lever Systems: Overview and Preparations

Preparations and Adjustment Sequence

Double Lever Systems: Repeatability Check

Double Lever Systems: Off-center Error Importance

Double Lever Systems: Checking Off-Center Error

Double Lever Systems: Off-Center Error Adjustment

3-Point Measurement Procedure for Off-Center Error

Double Lever Systems: 3-Point Measurement Details

Double Lever Systems: Adjusting Off-Center Error via Filing

Double Lever Systems: Span Adjustment Methods

Double Lever Systems: Linearity Adjustment

Balance/Scale: Opening and Closing Procedures

Main PCB Replacement Procedure

Data Output Port Replacement Procedure

Error Codes: H, L, E01-E11 Causes and Solutions

Error Codes: E22-E55 Causes and Solutions

Service Specifications: Models TE214S to GE212

Service Specifications: Models TE1502S to TE4100