Need help?Do you have a question about the Sartorius Talent TE313S and is the answer not in the manual?
Provides a checklist for essential service procedures like repeatability and error checks.
Instructions for enabling and disabling the BPI mode for calibration and adjustment.
Details on Model 1, including weighing system type and resolution.
Steps for connecting the BPI adapter and activating the BPI mode for service software use.
Detailed steps for adjusting the zero-point offset using a digital voltmeter.
Method for calculating repeatability and identifying causes for tolerance deviations.
Procedure for checking off-center loading error across different positions on the weighing pan.
Method for adjusting the off-center error by filing a thin part.
Procedure for adjusting off-center loading error in double-lever systems using adjustment screws.
Method for adjusting deviation using screws based on 3-point measurement results.
Guidance on filing thin sites for off-center error adjustment in double-lever systems.
Procedure for replacing the main PCB, including data record management.
Instructions for reading out, storing, or ordering pre-programmed PCBs.
Steps for replacing the data output port assembly.
To Next Page
General