Need help?Do you have a question about the Sartorius Talent TE3102S and is the answer not in the manual?
General| Maximum Capacity | 3100 g |
|---|---|
| Readability | 0.01 g |
| Pan Size | Ø 120 mm |
| Calibration | External |
| Display | LCD |
| Power Supply | AC adapter / Battery |
| Repeatability (Std. Dev.) | 0.01 g |
| Linearity | ± 0.02 g |
| Weighing Pan Size | Ø 120 mm |
| Stabilization Time (typical) | 2 s |
| Net Weight | 2.5 kg |
| Stabilization Time | 2 s |
| Interface | RS232 |
| Operating Temperature | +10 °C to +40 °C |
Step-by-step guide for essential balance/scale checks and adjustments.
Procedure for activating the BPI mode and its prerequisites.
Description and function of each key on the balance/scale control panel.
Procedure to restore menu settings to factory defaults.
Finalizing BPI mode connection and instructions for safe exit from BPI mode.
Procedure to adjust the zero-point offset voltage using a DVM and balancing resistor.
Procedure for checking and adjusting the off-center loading error.
Procedure to adjust the balance/scale linearity using the service software.
Guidelines and procedures for checking off-center loading error in double lever systems.
Detailed steps for adjusting off-center error using adjustment screws.
Steps for adjusting the span using the operating menu for double lever systems.
Procedure to adjust the balance/scale linearity using the service software for double lever systems.
Steps for replacing the main PCB, including data backup and reprogramming.
Description of causes and solutions for common error codes displayed by the balance/scale.
Description of causes and solutions for additional error codes displayed by the balance/scale.
To Next Page