Need help?Do you have a question about the Sartorius Talent TE4101 and is the answer not in the manual?
General| Maximum Capacity | 4100 g |
|---|---|
| Readability | 0.1 g |
| Calibration | External |
| Display | LCD |
| Repeatability | 0.1 g |
| Linearity | ±0.2 g |
| Interface | RS-232 |
| Operating Temperature | 10 °C to 40 °C |
| Weight | 2.5 kg |
| Power Supply | AC adapter |
| Stabilization time | 2 seconds |
Crucial safety and authorization requirements for servicing Sartorius balances.
Outlines warranty claims, procedures for defective units, and return protocols.
Procedures for exchanging the main PCB and opening the balance housing.
Step-by-step guide for connecting the BPI adapter to the balance/scale.
Final steps to activate BPI mode and caution for exiting BPI mode.
Describes the process of adjusting the zero-point offset using a DVM.
Correlates zero-point offset voltage with resistor values for adjustment.
Details adjusting off-center errors using screws on double-lever systems.
Method for determining and adjusting off-center loading errors using 3-point measurements.
Guidance on adjusting off-center errors by filing thin parts on specific models.
Illustrates filing positions for off-center error adjustment on different pan types.
Details span adjustment using menu settings and calibration weights for double lever systems.
Procedure for checking and adjusting linearity for double lever systems.
Procedure for replacing the main PCB and reprogramming data records.
Steps for replacing the data output port and testing its functionality.
Lists error codes, their causes, and corresponding solutions.
Lists additional error codes, their causes, and corresponding solutions.
To Next Page