Need help?Do you have a question about the Sartorius Talent TE313S-DS and is the answer not in the manual?
General| Capacity | 310 g |
|---|---|
| Readability | 0.001 g |
| Pan Size | Ø 120 mm |
| Display | LCD |
| Power Supply | AC Adapter |
| Repeatability (Std. Dev.) | 0.001 g |
| Linearity | ±0.002 g |
| Stabilization time (typical) | 2 s |
| Interface | RS-232 |
| Calibration | External |
| Operating Temperature | +10 °C to +40 °C |
Service personnel must complete a course; avoid unauthorized repairs.
Procedures for resetting write-protect and replacing the main PCB.
Lists required service software, BPI adapter, and RS232 connecting cables.
Steps to access the operating menu and change device settings.
Configuration for weighing parameters, filter selection, and stability range.
Settings for calibration, auto zero function, and weight units.
Settings for display accuracy, program selection, and weight units.
Step-by-step guide to connect the BPI adapter to the balance/scale.
Final steps for BPI mode activation and caution about write-protect.
Procedure to adjust zero-point offset using DVM and balancing resistor.
Method for adjusting off-center loading error by filing a thin part.
Steps to adjust linearity using the service software and BPI mode.
Steps to adjust off-center error using 3-point measurement and adjustment screws.
Steps to adjust linearity using service software and BPI mode for double lever systems.
Steps for reading data, replacing the main PCB, and reprogramming.
Steps for replacing the data output port and testing functionality.
To Next Page