Need help?Do you have a question about the Sartorius Talent TE412 and is the answer not in the manual?
General| Maximum Capacity | 410 g |
|---|---|
| Readability | 0.1 g |
| Pan Size | 120 mm |
| Calibration | External |
| Display | LCD |
| Capacity | 410 g |
| Linearity | ±0.2 g |
| Operating Temperature | 10°C to 30°C |
| Power Supply | AC adapter or battery |
| Interface | RS232 |
| Stabilization time (typical) | 2 seconds |
| Stabilization Time | 2 seconds |
Service personnel must complete a Sartorius course; unauthorized repairs are prohibited.
Outlines the sequence for checking repeatability, off-center error, sensitivity, and linearity.
Instructions for enabling BPI mode and disabling write-protection for calibration and adjustment.
Details TE64, TE124S, TE214S, TE313S-DS (Double Lever) and TE153S-DS (Strain Gauge) models.
Details TE313S (Double Lever) and TE153S, GD252 (Strain Gauge) models.
Details TE212, TE412, TE612, GE212, GE412, GE812 models with Strain Gauge weighing systems.
Details TE1502S, GE1302, TE601, TE4101, TE6101, GE811, TE12000, TE6100, TE4100 (Strain Gauge) and TE3102S (Double Lever).
Step-by-step guide to activate BPI mode using the BPI adapter for service software connection.
Lists necessary checks: overload stop, zero-point offset, repeatability, off-center error, span, linearity.
Steps for replacing the main PCB, including data backup, component transfer, and reprogramming.
To Next Page