Need help?Do you have a question about the Sartorius Talent TE214S and is the answer not in the manual?
Crucial information for service personnel regarding required training and qualifications.
Instructions for activating the BPI mode and deactivating write-protection before service operations.
Requirements and usage guidelines for the Sartorius Service Software for adjustments.
Methods for adjusting off-center load and span adjustments using external calibrated weights.
Steps to access the operating menu and modify its settings.
Procedure to confirm or exit menu code settings and store changes.
Settings for calibration and adjustment modes, including accessibility and blocking.
Procedure for resetting the balance/scale menu to factory default settings.
Step-by-step guide to activate the BPI mode using the BPI adapter and service software.
Steps for adjusting the zero point offset value of the strain gauge system.
Procedure for checking the off-center loading error on strain gauge systems.
Steps for adjusting the span of the strain gauge system.
Procedure for checking the overload stop, requiring service software and BPI mode.
Detailed steps for checking the overload stop, including using service software and adjusting stop screws.
Procedure for adjusting the zero-point offset value using a digital voltmeter and balancing resistor.
Procedure for checking repeatability and calculating 'S' from weighing operations.
Procedure for checking off-center error by placing test weights at different positions.
Method for adjusting off-center error by filing a thin part on the strain-gauge load receptor.
Details the methods for adjusting the span, using service software or a calibration routine.
Instructions for adjusting linearity using the service software and BPI mode.
Detailed steps for adjusting off-center error using 3-point measurement and adjustment screws.
To Next Page
General